Volae Granny Guard
210000003973Regular price $40.00 Sale price $20.00 Save $20.00
Prevents "dang my chain came off" when down shifting to the Granny ring. Install the Granny Guard and loosen the front derailleur inner stop screw until it permits shifting under pressure. Now, go ahead --- shift right in the middle of that climb. You won't over shift. Gone are the days of struggling up a hill in the middle ring because you underestimated how steep it was and are afraid to downshift in the middle of the climb. View our video on YouTube for more info.
HP Velotechnik Chain Tube Spring Clip Kit
210000003939Regular price $22.00 Save $0.00
Spring clips make the installation of chain tubing much easier on most recumbents. Designed to mount around idler pivot bolt.
- 1 long spring clip (front).
- 1 short spring clip (rear).
- 2 chain tube retainer sleeves.
- Chain tubing is not included.
ICE Chaintube 35"/895mm
210000003942Regular price $18.00 Save $0.00
Ice branded chaintube 35" long (895mm). One side is flared. Can be cut to fit.
ICE P-Clip Chain Tube Guide
210000003947Regular price $1.00 Save $0.00
Replacement ICE P-clip chain tube guide. Does not include bolt.
ICE Chainring Guard
210000003941Regular price $97.00 Save $0.00
Designed for the ICE standard models this optional chain ring guard is a light weight and durable unit made from heat treated Aluminum Alloy. The guard is an added safety feature but is also very good in preventing you from accidentally brushing against the oily chain rings and avoiding the recumbent rider tell tale prints on your legs or trousers.
The guard fits without removing the chain set by clamping the guard to the bottom bracket shell. A chain ring of up to 58t can be used. You need to have 1/2" of bottom bracket shell available between the derailleur mast welds and the crank in order to clamp this on. Fits approximately a 43.65mm outside diameter bottom bracket shell.
HP Velotechnik Rubber for Spring Kit
210000003936Regular price $3.00 Save $0.00
T-Cycle Floating Chaintube Holder with Flared Tube
210000003952Regular price $28.50 Save $0.00
TerraCycle's floating chaintube holder allows you to use short sections of chaintube which will have the ability to move up and down, left and right with the chain, while staying in place fore and aft to protect your frame from chain rub. Traditional methods of fixing chaintubes to recumbents usually result in the tube fighting the chain, causing friction and noise since the chaintubes are fixed in place or minimally movable.
This new system follows the same philosophy as their floating idlers- it's best to allow movement as you change gears and let the chain go where it needs to go. This is proving to be the solution for many bikes/trikes that need some frame protection without adding additional idlers. Hostel Shoppe offers the mount in a "Universal" version that attaches to the frame with Zip Ties. It's possible to put this version almost anyplace.
Chaintubes have a reputation for being noisy, draggy, and prone to filling with chain crud. While this can be true, it doesn't have to be. It's possible to have a chain tube that is almost friction free, and unlikely to get gunked up.
Here's how to do it:
Greenspeed Chain Gobbler GT20/26
210000003927Regular price $149.00 Save $0.00
Adjusting the length of the chain to suit different riders’ heights can be time consuming if it needs to be done often. Whereas the Gobbler gobbles up excess chain and enables the leg length to be adjusted in seconds without having to touch a dirty chain. It can be very useful, if you like to share your trike with other family members, friends, or strangers.
Volae Chainring Spacer Kit 2.2mm
210000003971Regular price $8.00 Sale price $4.00 Save $4.00
Optional chainring spacer kit works in conjunction with the Volae Granny Guard for Vuelta and Salsa small 74mm BCD chainrings. Set of five spacers.
ICE Velcro Strap For Chaintube
210000003948Regular price $3.00 Save $0.00
ICE Velcro strap for attaching chaintube.
HP Velotechnik Scorpion FS 26 Upper Chain Tube
210000005783Regular price $32.00 Save $0.00
Replacement upper Chain Tube for the HP Velotechnik Scorpion FS 26.
As pictured. Does not include any additional mounting hardware.
Hase Heat Shrink for Chain Tube Bracket
210000007622Regular price $4.00 Save $0.00
The Hase Heat Shrink works with the Hase Chain Tube Plastic Bracket to secure it to the quick adjust to hold the chain tube bracket to the trike.
HP Velotechnik Chain Idler RSV Quick Adjust O-Ring
210000007933Regular price $1.50 Save $0.00
Replacement O-ring for the HP Velotechnik chain quick-adjust idler wheel.
Check your quick adjust idlers. Missing or damaged O-rings increase noise and wear.
O-ring only. Sold singly.
ICE Sprint Chaintubes
210000008068Regular price $61.00 Save $0.00
Chaintubes for an Ice Sprint to cover your chain.
Hase Chain Tube Bracket Plastic
210000007621Regular price $6.00 Save $0.00
The Hase Chain Tube Plastic Bracket works with the Hase Heat Shrink to secure it to the quick adjust to hold the chain tube bracket to the trike.
T-Cycle Double Sided Clamp On Chain Keeper
210000003950Regular price $32.00 Save $0.00
The Clamp-On Double-Sided Chain Keeper is designed to maintain your chain on an Over/Under Idler. The double-sided and single-sided Clamp-On Chain Keepers are TerraCycle exclusive products. Nowhere else will you find a chain keeper that clamps onto the head of an idler bolt. Clamping on means freedom to float your chain keeper side to side with the chain and the idler, and it means super easy setup and maintenance. The abrasion resistant nylon arm, stainless steel fasteners and high quality machined aluminum means your Clamp-On Double-Sided Chain Keeper will be with you a long time.
These clamp on chainkeepers were developed to enable idler float and to make everyone's lives simpler. Since the chainkeeper attaches itself to the head of the idler bolt, it is completely independent of everything else. That means the idler bolt can be tightened without squeezing the idler or chainkeeper. This allows the idler to float side to side with the chain for better efficiency. Also, since this chainkeeper clamps itself on, you don't have to put it on until everything else is done- very handy for maintenance. Install the idler and any spacers needed to keep it from rubbing on things and tighten the idler bolt. Lay in the chains, and THEN install the chainkeeper. How easy is that?
Shimano Alfine CT-S500 Chain Tensioner, Black
210000008225Regular price $36.00 Save $0.00
Perfect for SHIMANO ALFINE equipped bicycles, the double pulley chain tensioner can accommodate a front chainring difference of 16 teeth and sprockets sized 18 to 20 teeth.
Catrike Chain Tube Assembly
210000008436Regular price $25.00 Save $0.00
This Catrike chain routing system uses low-friction PTFE tubing to guide the chain. The ends of the tubes are flared for quiet and smooth running.
HP Velotechnik Chain Tube Mounting Spring Front/Left
210000008413Regular price $7.50 Save $0.00
HP Velotechnik Scorpion fs 26 Lower Chain Tube
210000005785Regular price $24.00 Save $0.00
Replacement lower Chain Tube for the HP Velotechnik Scorpion FS 26.
As pictured. Does not include any additional mounting hardware.
HP Velotechnik Chain Tube Mounting Spring Rear/Right
210000003938Regular price $7.50 Save $0.00