Chain Management and Idlers

Combines a 15 tooth sprocket with sidewalls to keep the chain in place on rough roads. Holes must face inward to prevent the idler from coming off ...

The Hase Chain Tube Plastic Bracket works with the Hase Heat Shrink to secure it to the quick adjust to hold the chain tube bracket to the trike.

The Hase Heat Shrink works with the Hase Chain Tube Plastic Bracket to secure it to the quick adjust to hold the chain tube bracket to the trike.

HP Velotechnik Chain Catch HookKeeps Chain from slipping off the Idler PulleyFor use with most Scorpion Models.  Fits the standard HP Velotechnik 9...

Replacement O-ring for the HP Velotechnik chain quick-adjust idler wheel.Check your quick adjust idlers.  Missing or damaged O-rings increase noise...

New design by HP, the spring is short.

Replacement idler for Street Machines, Scorpion trikes, Gekko trikes, Grasshoppers and Speedmachines.

HP Velotechnik idler o-rings replace your worn out stock o-rings. Two are needed per idler.

The HPV Quick Adjust Kit is perfect if you would like to share your HP Velotechnik bike or trike with multiple riders of different heights.  Adjust...

The HPV quick adjust kit is perfect if you have one HPV trike and multiple riders of different heights, adjusting your trike just got simpler. The ...

ICE 70mm idler assembly with bearing and bolt. For all models except VTX.

Ice branded chaintube 35" long (895mm). One end is flared. Can be cut to fit.

The ICE Easy Adjust Kit is perfect if you have one ICE trike and multiple riders of different heights.  Adjusting your trike just got simpler. The ...

The ICE quick adjust kit is perfect if you have one ICE trike and multiple riders of different heights, adjusting your trike just got simpler. The ...

ICE flexible chain tube. This is used on all ICE Folding trikes to protect the frame when the trike is folded. Replacement flexible chain tubing mo...

Replacement ICE P-clip chain tube guide. Does not include bolt.

Chaintubes for an Ice Sprint to cover your chain.

ICE Velcro strap for attaching chaintube.

Replacement ICE VTX Front Chaintube w/Chainkeeper.

Custom designed for the ICE VTX, this 90mm large diameter pulley reduces drivetrain resistance and noise. featuring a larger bearing and CNC machin...

Replacement ICE VTX Rear Chaintube w/Chainkeeper

Replacement idler wheel for EZ-Series Recumbents. Hardware included.Product Specs Idler has a 47.37mm diameter and 29.14 mm wide Idler has one trac...

With beautifully machined side aluminum side plates and a pair of "Ceramic Bearings" that are machined to the tightest tolerances, this is the top ...

The TerraCycle Sport Power Idler is the second best power idler on the market (second only to the Elite Power Idler). With aerospace grade ballisti...

The TerraCycle Sport Dual Idler Kit for Catrikes is what comes standard on all current model Catrikes.With aluminum cog and steel bearings, the Spo...

The Clamp-On Double-Sided Chain Keeper is designed to maintain your chain on an Over/Under Idler. The double-sided and single-sided Clamp-On Chain ...

The Easy Racers Return Idler Kit allows you to get rid of that old stock S bend jockey wheel setup or fixed chaintube, and mount a high quality Ter...

TerraCycle's floating chaintube holder allows you to use short sections of chaintube which will have the ability to move up and down, left and righ...

The T-Cycle Sport Over/Under Idler is the second best over/under idler on the market (second only to the Elite Over/Under Idler). With aerospace gr...

For those who prefer the Over/Under Idler concept. Kit consists of an Over/Under idler with an aluminum power side cog, a special Stainless idler b...

The Chain Gobbler 2 for E.V.O. - Bosch lets you adjust the boom length to the perfect fit for each rider within seconds and without tools.  The ins...

Why sacrifice comfort and performance when a TerraTrike is shared amongst multiple riders? Use the Chain Gobbler 3 to adjust your trike’s boom leng...

TerraTrike's 10t Deluxe Idler is designed for quiet operation and uniform wear (original polyurethane version could flat-spot). Long-wearing black ...

TerraTrike's 13t Deluxe Idler is designed for quiet operation and uniform wear. Long-wearing black delrin material with pre-installed sealed bearin...

The Standard idler has a bearing and retaining ring. Two of these are used in the front and two are used in the rear. Terratrike idler wheels are n...

The Volae Front Idler Conversion kit converts your old Volae idler hardware kit to accommodate the new Volae Front Idler made by T-Cycle. Click her...

This Catrike chain routing system uses low-friction PTFE tubing to guide the chain.  The ends of the tubes are flared for quiet and smooth running....

Replacement lower Chain Tube for the HP Velotechnik Scorpion FS 26.As pictured.  Does not include any additional mounting hardware.

Replacement upper Chain Tube for the HP Velotechnik Scorpion FS 26.As pictured.  Does not include any additional mounting hardware.

Perfect for SHIMANO ALFINE equipped bicycles, the double pulley chain tensioner can accommodate a front chainring difference of 16 teeth and sprock...

New Greenspeed Chain Gobbler for the new GT Series and new Magnum Series trikes.  The new frames now have an additional mounting point for the forw...

The HPV quick adjust kit is perfect if you have one HPV trike and multiple riders of different heights, adjusting your trike just got simpler. The ...

Repalcement rear Long Chain Tensioner for use with Pinion and Rohloff hubs for HP Velotechnik bikes and trikes.  Extra large pulleys for smooth ope...

Replacement lower Chain Tube for the HP Velotechnik Scorpion FX 20.As pictured.  Does not include any additional mounting hardware.