Lube & Finish Care

Using PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditions.

• Penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion
• Also work great on cables, spoke nipples, and derailleur and brake pivots

Park Tool’s GSC-1 GearClean® Brush has a unique design. A large comfortable handle with a curved, toothed-end reaches dirt deep between the gears, and tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and freewheel. Works great on brakes or other places where dirt collects.

• 10 speed compatible
• Handy size for quick cleaning anywhere
• Made of sturdy nylon

This is the whole system. You got the Cyclone Chain Scrubber, you got the gear brush and, that chain degreaser is goning to get that chain shiny and shifting smoothly. Simple, effective, and ready to clean

It's going to clean that chain. Put it in the two ends, fill it with the soap and run it through while holding the handle. This is the next best thing to doing it by hand with a brush and bucket of water. Snap those clamps shut and fill it to the fill line. Pedal at least 30 revolutions for a clean chain!

Park Tool's poly-urea lubricant was developed specifically for bicycle maintenance and repair. PolyLube 1000 has an extremely high shear strength to protect vital parts under extreme conditions.

• All-purpose, green poly-urethane grease
• Repels moisture and is compatible with conventional greases
• 4 oz.

Biodegradable Citrus ChainBrite is specially formulated for use in the Cyclone Chain Scrubber. It quickly removes the toughest grease and grime buildup, yet won’t harm alloy, plastic or rubber parts. Also works great as a general purpose parts cleaning fluid. Flip-top lid makes pouring easy.

• Use CB-2 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush.

A clean bike looks great, performs better, lasts longer, and is easier to maintain. Now with the BCB-4 Bike Cleaning Brush Set, having a clean bike is easier than ever. “Sure Grip” dual density handles insure a positive grip even with wet hands. The BCB-4 contains four brushes, each specially designed for a specific cleaning purpose:

• The ""Y" brush is for large tube and tires. It will wrap around these to clean. The wire can also be bent to different shapes for different size tire and tube shapes.
• The frame cleaning sponge brush is a combination scrubbing sponge and bristle bush. Very useful between spokes on the rim. Also good for rotors and under the headset, and under the fork.
• Tapered detail brush, also called a "bottle brush" is useful for cleaning hub centers and narrow areas, such as under front derailleurs, behind brakes, etc.
• The GSC-1 gear brush is for rear derailleur pulleys, rear cogs and any general degreasing. The comb section is for cleaning between cogs where the bristles cannot reach.