Parts
Filters
- Adaptive Cycling (3)
- Chaintubes and Accessories (14)
- Crank Arms (1)
- Derailleur Hangers (2)
- E-Assist Mounts (3)
- Forks (1)
- Frame Parts (3)
- Front Suspension Parts (17)
- Handlebars (8)
- Hardshell Seats and Pads (6)
- Headsets (2)
- Hubs and Axles (2)
- Idlers (2)
- Mesh Seats - Pads and Covers (11)
- Parking Brakes and Levers (1)
- Quick Adjusts (3)
- Rear Suspension Parts (5)
- Recumbent Seat Hardware (9)
- Rims (1)
- Stems (2)
HP Velotechnik Adjustable End Stops
HP Velotechnik Adjustable End Stops are a great time saver for those who frequently remove their seat for travel or storage. The adjustable seat st...
View full detailsHP Velotechnik Front Suspension Anti-Roll Stabilizer Bar
Make your trike's front suspension softer or harder, depending on your weight and load capacity. the anti-roll bar, which comes in white (soft) or ...
View full detailsHP Velotechnik Anti-Roll Stabilizer Bar for Scorpion fs 20/26 Plus
Make your Scorpion fs 20/26 Plus's front suspension softer or harder, depending on your weight and load capacity. The anti-roll stabilizer bar come...
View full detailsHP Velotechnik Scorpion FS 26 Battery Mount
Left or right side battery mounts for an HP Velotechnik Scorpion FS 26. All the necessary hardwear for installation is included with these mounts.
HP Velotechnik Battery Mount Scorpion fx 2/fs 20/fs Plus 20 or 26
Left or Right side battery mount for an HP Velotechnik Scorpion, Scorpion fx, Scorpion fx 2, Scorpion fs 20, Scorpion fs plus 20 and Scorpion fs pl...
View full detailsHP Velotechnik BodyLink Seat
The two-piece BodyLink hard shell seat is adjustable for your torso length. Fits on 2010 and newer bikes and trikes from HP Velotechnik including t...
View full detailsHP Velotechnik BodyLink Seat Wings from 01/2010
The HP Velotechnik Seat Wings offer optimal side support for lateral forces when riding a trike. The padded hip supprts are screwed to the seat sh...
View full detailsHP Velotechnik Chain Catch Hook
HP Velotechnik Chain Catch HookKeeps Chain from slipping off the Idler PulleyFor use with most Scorpion Models. Fits the standard HP Velotechnik 9...
View full detailsHP Velotechnik Chain Idler RSV Quick Adjust O-Ring
Replacement O-ring for the HP Velotechnik chain quick-adjust idler wheel.Check your quick adjust idlers. Missing or damaged O-rings increase noise...
View full detailsHP Velotechnik Chain Tube Mounting Spring Front/Left
New design by HP, the spring is short.
HP Velotechnik Chain Tube Mounting Spring Rear/Right
HP Velotechnik Cloud Nine Gekko Seat Cushion
This cushy add-on for all Gekko models provides lots of extra comfort (living up to its name - Cloud Nine!). And adds a slightly higher seating pos...
View full detailsHP Velotechnik DV22 Rear Shock Spring
Rear Shock Replacement Springs for your HP Velotechnik. Fits the DNM-DV22 shock. Click here to view the shock.Specifications 83 mm long 450 lbs/in...
View full detailsHP Velotechnik Front Suspension Spring Each
Make your trike's front suspension softer or harder, depending on your weight and load capacity. Front springs come in red (soft) or yellow (hard),...
View full detailsHP Velotechnik Handlebar Clamp For Folding
HP Velotechnik 30mm quick release left handlebar clamp for folding the handlebar during the folding process on the Scorpion fs 26, Scorpion fs26 En...
View full detailsHP Velotechnik Idler
Replacement idler for Street Machines, Scorpion trikes, Gekko trikes, Grasshoppers and Speedmachines.
HP Velotechnik Idler O-Ring
HP Velotechnik idler o-rings replace your worn out stock o-rings. Two are needed per idler.
HP Velotechnik Lower Quick Release Seat Lever
Replacement seat quick release levers fit all ErgoMesh and BodyLink seats with three points of attachment: lower, middle and upper. Includes skewer...
View full detailsHP Velotechnik Middle Quick Release Seat Lever
Replacement seat quick release levers fit all ErgoMesh and BodyLink seats with three points of attachment: lower, middle and upper. Includes skewer...
View full detailsHP Velotechnik Pivot Bolt
Replaces the stock rear suspension pivot bolts when you add a rear rack or lowrider rack. Fits all models without a SpaceFrame. Product Notes: DIN...
View full detailsHP Velotechnik Quick Adjust Kit
The HPV Quick Adjust Kit is perfect if you would like to share your HP Velotechnik bike or trike with multiple riders of different heights. Adjust...
View full detailsHP Velotechnik Quick Release for Seat Angle Adapter
Replacement Quick Release for the HP Velotechnik Seat Angle Adapter (for the Gekko, Gekko fx, and Gekko fx 26). Shaft length is 152mm overall. Black.
HP Velotechnik Rear Derailleur Hanger
Replacement derailleur hanger for your HP Velotechnik recumbent.
HP Velotechnik Rubber for Chain Tube Spring Kit
HP Velotechnik Scorpion Trike Handlebar Long
Long, two parts steering bar for Scorpion trikes and is adjustable in width. This steering bar provides a 8cm higher position and is ideal for ride...
View full detailsHP Velotechnik Seat Angle Adapter Gekko
The HP Velotechnik Seat Angle Adapter can be mounted to the Gekko, Gekko fx, and Gekko fx 26. It provides a more upright seat back position by up t...
View full detailsHP Velotechnik Seat Rain Cover
Made of durable ripstop nylon, the light cover keeps the recumbent’s seat dry and clean when parked. When not in use, it is kept in the integrated ...
View full detailsHP Velotechnik Shock Boot
Replacement shock boot for front suspension struts. Comes in black or blue.
HP Velotechnik Spring Travel Reducer Clip
Necessary to install rear fender or rear rack on Speedmachine with coil spring shock. Reduces travel of rear suspension to prevent interference.
HP Velotechnik Stand Up Aid For Trikes Without Front Suspension
Stand-Up aid for HP Velotechnik non-front suspension trikes made from March of 2012 or later. Fits the Gekko, Gekko fx, Scorpion, Scorpion fx, Sco...
View full detailsHP Velotechnik Steering Dust Boots
Rubber cover for rod end (2 spacer bushings D3BUS8_6 and longer screw required for retrofitting.)
HP Velotechnik Steps E6000 Front Boom Quick Adjust
The HPV quick adjust kit is perfect if you have one HPV trike and multiple riders of different heights, adjusting your trike just got simpler. The ...
View full detailsHP Velotechnik Street Machine Handlebar
HP Velotechnik Street Machine replacement under seat steering handlebars are availble in two sizes.1. Wide (65cm) handlebars for Under Seat Steeri...
View full detailsHP Velotechnik Trike Handlebar Fits Gekko & Gekko fx20/26
Specifications: Aluminum Black 25'x13'x1'
HP Velotechnik Trike Parking Brake Kit
The parking brake kit for your HP Velotechnik trike includes a v-brake, cable and housing, and friction brake lever.Product Notes:Check your trike ...
View full detailsHP Velotechnik Upper Quick Release Seat Lever W/ Velcro Strap
Replacement seat quick release levers fit all ErgoMesh and BodyLink seats with three points of attachment: lower, middle and upper. Includes skewer...
View full details