Neck & Wrist Rests

The New ICE Wrist rests are designed to comfortably and stylishly support the rider's wrists while riding your trike. Ideal for long journeys and riders with limited grip or strength. Incredible comfort & wrist support while riding. Lightweight construction and adjustable, weighing only 70g each. Easy to fit, simply snap onto your handlebar and tighten. Fits all ICE models, except the VTX and is compatible with other trike manufacturers, with a vertical 22.2 mm ø handlebar size. Washable wrist pad. Optional padded Velcro support strap can be purchased separately. Sold as a pair, for both handlebars.

Replacement hand rest foam. Order in each, foam only.

Ergo neck-rest is now wider and even more comfortable. Fully adjustable for both height and angle and can be fitted to Ergo mesh seats to provide neck support and increased comfort on long rides. Adjustable tension strap for fully customisable comfort and reflective detailing to keep you safe at night.

The new Catrike neck rest, with its contemporary look, light weight and added comfort; it is the perfect upgrade for your Catrike. Fits all Catrikes. Clamps to a 1" diameter tube.

This nifty headrest is more comfortable than ever. It sits around 1/4" behind your head, so it doesn’t whack you when going over bumps, but it’s there when you need it for long uphills and flats. Will not affect use of safety flag mounts.

• Adjustable both vertically and horizontally.
• fits all Greenspeed trikes with 3/4" Outside Diameter seat rails (GTO/GTR/GT1/GT3/GT5/GTT/X1/X3/X5).

Replacement cover for the Catrike adjustable headrest. Embroidered with the Catrike logo.

This new headrest design fits the Magnum XL, Magnum SD and Magnum BW.

It is easier to fit than the earlier headrests as it clamps on to the seat cross brace, so there is no need to remove the seat tube plugs. It is adjustable both fore and aft, and also for height. The Magnum headrests have a 1” clamp. It is designed to give neck support and fit below a helmet.

Light weight headrest adds support and comfort. Mounts to an HP Velotechnik ErgoMesh seat.

ICE’s design team have returned to the drawing board to redesign the ICE Neck Rest. The outcome is yet another breakthrough in design. The newly designed fitting systems for both seat configurations, as well as a brand new Neck Rest Frame and Padding System, make it the most comfortable, simple and adaptable Neck Rest on the market.

The new clamps massively reduce the time taken to fit and adjust the Neck Rest. This has been achieved by reducing the amount of assembly components. ICE has also strengthened the clamping system on mesh seats to prevent the clamp from rotating around the seat frame. Both fitting systems allow the height and angle of the neck rest to be adjusted.

The Neck Rest frame is made from a high strength aluminium bar rail that provides a balance of strength and comfort. The uprights are now a standard bike saddle rail width to allow the clamping of standard bike accessories. The Padding system is now made from two parts. An adjustable tensioning strap that fits around the Neck Rest frame allows the rider to alter the tension and support of the Neck Rest and the Pad. The Pad itself is wider than its predecessor for better weight distribution. The cover contains a dense piece of foam selected by ICE to provide optimum support and comfort. The foam is easily accessible so that it can be removed when the cover is washed. The cover, made from a breathable material then wraps around the tension strap using Velcro. The rear of the cover now has a highly reflective strip for improved visibility.

Realizing that the Neck Rest is also used to manoevure the trike by hand ICE have incorporated a handle into the frame making it even easier to move the trike around.

This headrest may possibly work on other hradshell seats. You may have to drill three holes in your seat.

Catrike handrests are a great way to give your hands additional support. These are able to retro-fit on pre-2013 models of Catrike. Sold as a pair.

Adjustable handrests for your HP Velotechnik recumbent. Sold as a pair with a left and a right. Perfect for the long ride when you would like to give your hands a rest.

The height and angle of the headrest can be adjusted, so that the headrest can be used either as a head or neck support and is also suitable for riders wearing a helmet. The removable, washable padding is fitted with a reflector strip for good visibility in the dark and a belt for attaching a rechargeable rear light. The headrest can be retrofitted to existing BodyLink seats.

Product Notes:

• 40 mm height adjustability / 28 degrees angle adjustability.

Replacement cushion for ICE neckrests from 2014 and newer.

This new headrest designed is for the GT16, GT20 and GT26. It is easier to fit than the earlier headrests as it clamps on to the seat cross brace, so there is no need to remove the seat tube plugs. It is adjustable both fore and aft, and also for height. The GT headrests have 7/8” clamps. It is designed to give neck support and fit below a helmet.

Replacement cushion for ICE neckrests from 2013 and previous.

Velcro support strap for the ICE wrist rest. Easy fit and remove, padded and comfortable support strap, gives extra wrist restraint and controls lateral movement. Ideal for riders for with limited arm or wrist control. Sold individually, fits left or right wrist rests and is fully washable.

The Ergo neck-rest padded cover is now wider and even more comfortable and is designed to fit the existing mesh seat neck rest. Adjustable tension strap for fully customisable comfort and reflective detailing to keep you safe at night.

This flexible adaptive bike headrest takes comfort to the next level. You can lean back, rest your head, and enjoy triking more than ever.