Parts

High quality tubes from Schwalbe. Valve cores are removable to put in sealant.

A Schwalbe tube is not just a tube.

Airtightness. Apart from the quality of the materials the purity of the rubber mixture is crucial to the quality of the tube. The base material is therefore sieved at enormous pressure through seven filters before being extruded. All tubes are inserted into a mold and inflated for vulcanization to ensure consistent wall thickness and high air pressure retention.

Reliability. All tubes are inflated and stored for 24 hours in order to test for air pressure retention. Afterwards each, individual tube undergoes a careful visual inspection. This special quality control helps prevent unpleasant surprises and is why, over many years, Schwalbe tubes have become highly respected for outstanding reliability by bicycle dealers.

Valve. All valves are nickel plated and threaded and valve inserts are replaceable. Schwalbe tubes with the classic bicycle valve are capable of pressure testing thanks to a high pressure valve seal. Each tube is crowned with a transparent polycarbonate dust cap.

349mm PV 16x1-1/8/28-37mm 40mm Valve - Schwalbe #4

• Presta Valve
• 40mm Valve Stem
• 85 grams

355mm PV 18x1.5-1.75/32-47 - 40mm Valve - Schwalbe #5

• Presta Valve
• 40mm Valve Stem
• 95 grams

406mm PV 20x 9-1.5/23-40 - 40mm Valve - Schwalbe #6A

• Presta Valve
• 40mm Valve Stem
• 65 grams

451mm PV 20x1-1/8/28-37mm/40mm Valve - Schwalbe #7A

• Presta Valve
• 40mm Valve Stem
• 105 grams

451mm PV 20x1.0/23-25mm /40mm Valve - Schwalbe #7B

• Presta Valve
• 40mm Valve Stem
• 105 grams

406mm PV 20x1.1-1.5/28-40mm/40mm Valve - Schwalbe #6

• Presta Valve
• 40mm Valve Stem
• 95 grams

406mm PV 20x1.5-2.5/40-62mm/40mm Valve - Schwalbe #7

• Presta Valve
• 40mm Valve Stem
• 95 grams

559mm PV 26x1.1-1.5/25-40mm/40mm Valve - Schwalbe #12A

• Presta Valve
• 40mm Valve Stem
• 120 grams

559mm PV 26x1.5-2.2/40-62mm/40mm Valve - Schwalbe #13

• Presta Valve
• 40mm Valve Stem
• 190 grams

700mm PV 700x1 1/2-1.4/28-45mm/40mm Valve - Schwalbe #17

• Presta Valve
• 40mm Valve Stem
• 190 grams

High quality tubes from Schwalbe. Valve cores are removable to put in sealant.

A Schwalbe tube is not just a tube.

Airtightness. Apart from the quality of the materials the purity of the rubber mixture is crucial to the quality of the tube. The base material is therefore sieved at enormous pressure through seven filters before being extruded. All tubes are inserted into a mold and inflated for vulcanization to ensure consistent wall thickness and high air pressure retention.

Reliability. All tubes are inflated and stored for 24 hours in order to test for air pressure retention. Afterwards each, individual tube undergoes a careful visual inspection. This special quality control helps prevent unpleasant surprises and is why, over many years, Schwalbe tubes have become highly respected for outstanding reliability by bicycle dealers.

Valve. All valves are nickel plated and threaded and valve inserts are replaceable. Schwalbe tubes with the classic bicycle valve are capable of pressure testing thanks to a high pressure valve seal. Each tube is crowned with a transparent polycarbonate dust cap.

349mm SV 16x1-3/8/28-37mm - Schwalbe #4

• Schraeder Valve
• 40mm Valve Stem
• 85 grams

349mm SV 16 x 1.75-2.5- Schwalbe AV3

• Schraeder Valve
• 40mm Valve Stem
• 85 grams

406mm SV 20x1.1-1.5/28-40mm - Schwalbe #6

• Schraeder Valve
• 40mm Valve Stem
• 95 grams

406mm SV 20x1.5-2.5/40-62mm - Schwalbe #7

• Schraeder Valve
• 40mm Valve Stem
• 95 grams

451mm SV 20x1-1/8 - 1-3/8/28-37mm - Schwalbe #7A

• Schraeder Valve
• 40mm Valve Stem
• 105 grams

451mm SV 20x1.0 - 25-28mm - Schwalbe #7B

• Schraeder Valve
• 40mm Valve Stem
• 105 grams

559mm SV 26x1.1-1.5/24-40mm - Schwalbe #12A

• Schrader Valve
• 40mm Valve Stem
• 120 grams

559mm SV 26x1.5-2.2/40-62mm - Schwalbe #13

• Schraeder Valve
• 40mm Valve Stem
• 190 grams

700c SV 700x28-45c Schwalbe #17

• Schraeder Valve
• 40mm Valve Stem
• 150 grams

Punctures become obsolete with the Marathon Plus. The SmartGuard® layer made from a flexible, special rubber offers a particular resistance to shards of glass and flints. Even a thumbtack cannot penetrate this protective layer. The SmartGuard belt does not increase rolling resistance. The Marathon Plus rolls as easily as a tire without protection. Wire bead. Blackwall.

Recommended Tubes:
Schwalbe Presta
Schwalbe Schrader

The Original. The archetypal high quality touring tire. Now completely revised: GreenGuard®. The highly elastic, India rubber layer is 3mm thick. One third of GreenGuard is made up of recycled latex products. “Anti-Aging”. The completely new sidewall construction can withstand for much longer the typical cracking resulting from overloading due to insufficient inflation pressure. Also the new Endurance Compound substantially increases durability. Blackwall.

Recommended Tubes:
Schwalbe Presta
Schwalbe Schrader

The new Volae front idler is made by T-Cycle from high quality delrin. This durable idler has an o-ring which provides great performance. It has an 6mm bearing and is 40mm in diameter.

When switching from the old Volae idler to the new Volae idler, you will need a Volae Front Idler Conversion Kit.
May also work on old Vision Recumbents, but will probably require hardware adaptation.

Smooth tread for easy rolling, good protection with K-Guard puncture protection belt. High-quality 50 EPI carcass, and available in Black with reflective sidewall strips.

Level 3 | K-Guard
Schwalbe's minimum standard for protection belts. This Guard has been proven for many years. It consists of natural rubber and is reinforced with KEVLAR® fibres. Together with the 50 EPI carcass all Active Line tires are well protected against punctures. KEVLAR® is a trademark of DuPont.

ACTIVE LINE
The basis for all Active Line tires is the high-quality 50 EPI casing material. SCHWALBE no longer produces tires with a coarse 20 or 24 EPI casing material. In addition, K-Guard provides effective puncture protection for Active Line tires.

Product Notes:

• Wire bead
• Max PSI 95
• ISO: 20" - 406/35
• Weight: 20" - 285 grams
• ISO: 26" - 559/35
• Weight: 26" - 395 grams

Recommended Tubes:
Schwalbe Presta
Schwalbe Schrader

Replacement front suspension elastomers for ICE trikes.  Sold as a pair.

Specifications

• Soft for lighter weight riders
• Medium for average weight riders
• Hard for heavier weight riders

FOR MILE EATERS. Durano is the right choice for high mileage purposes, because no other racing tire lasts longer. At the same time the Dual Compound offers great grip for training on wet roads. It has the proven RaceGuard® protection belt and is available as a folding or wire beaded tire. Blackwall.

- Under normal conditions, not loaded, on road and under ordinary braking expected tread life should be over 6500 miles.

Product Notes:

115psi
260 grams(folding)
559/28

The Volae Front Idler Conversion kit converts your old Volae idler hardware kit to accommodate the new Volae Front Idler made by T-Cycle. Click here for the new Volae Front Idler.

AIR SUSPENSION BUILT-IN

The Big Apple started off the Balloonbike trend ten years ago: Comfortable cycling without using complicated technology! Air cushion tires are used as natural suspension. Inflated to around 2 Bar a Balloonbike rolls really easily and with a full suspension effect. A normal tire with a width of 37 mm must be inflated to a rock-hard 4 bar, in order to roll similarly well.

Enjoy unique Balloonbike comfort. Because life is hard enough.

Recommended Tubes:
Schwalbe Presta
Schwalbe Schrader

The TerraTrike Comfort Pedal Conversion Kit is a great safety addition for your trike. Providing a comfortable foot support solution, they also allow for hands free entry. Specifically designed for recumbent trikes and easily adjustable. One pair is included in the kit. Pedals not included. One size fits most.

Product Notes:

• Orders are limited to two pair per customer.  No sales to bike shops.

Replacement elastomer for an ICE Trike's rear suspension. View the ICE suspension weight range chart to find your ideal elastomer or elastomer combo (26" wheels) and positioning.

Specifications

• 40mm Elastomers fit 2007 and newer models
• Inner diameter on the 40mm is 11.76mm and outer diameter is 30.17mm
• White is soft
• Grey is medium
• Black is hard

The fastest and lightest Marathon. Now in the highest Schwalbe category, Evolution Line. HD-Speed-Guard provides the highest level of puncture protection. RoadStar Triple Compound for the best handling characteristics. Greater tread depth increases lifespan. LiteSkin sidewall.

Recommended Tubes:
Schwalbe Presta
Standard Presta
Schwalbe Schrader
Standard Schrader

Shimano shift cable, tandem 3500mm length.

Replacement idler wheel for EZ-Series Recumbents. Hardware included. Idler has a 47.37mm diameter, is 29.14mm wide, has one track, has an 8mm inner diameter on the bearing and is made of hard plastic.

Use as an alternative to cleat systems: these pedals hold the front portion of the foot with a brace, guaranteeing the correct foot position, while the elastic strap around the heel prevents slipping. Fits adults shoes.

Product Notes:

• Sold individually, choose right or left pedal
• 9/16" Spindle

The Ventisit seat pad makes sure your back doesn't get wet during your recumbent bike trips. The Ventisit's open structure breaths effectively. The seat pad is very comfortable due to its suspension, which is noticeable, but not too soft. It is a joy for your back. As you bike, you simply stay dry and comfortable. Non-slip coating included on all new pads.

Sizing:

• Fits Catrike (Villager,Trail, Road, Expedition,700 and Pocket) and HP Velotechnik (Standard Ergomesh Seats) 80x35x2 cm
• Ventisit's Classic pads are 2cm thick.

Product Notes:

• Very longwearing
• Does not absorb fluids
• Super light weight (as little as 220 grams or 7.7 ounces and up)
• Does not damage your clothes
• UV resistant
• Odor free.
• Colorfast
• Will look good for years
• Washable at 40 degrees C or 104 degrees F
• Two-year guarantee for normal use.

Seat pads can be easily secured to your seat with the Ventisit Nylon Straps or the Ventisit Velcro Straps.

Protect your clothing from chain grease, your frame from paint chips and quiet down all that noise from chain slap. Low friction teflon tubing eliminates chain drag in the tube on your recumbent bike.

Unless you're very creative, be sure to order HP Velotechnik's Chain Tube Spring Clips to make the installation easier.

• Tubing length easily trimmed with sharp utility knife.
• One tube
• Length: 39.5 inches
• 16mm O.D.
• 13mm I.D.
• 2mm wall thickness

Standard butyl rubber innertube. Presta valve.

Specifications:

• ISO Diameter: 305 / 16" BMX
• ISO Width (mm): 31 mm , 32 mm , 33 mm
• Labeled Size: 16 x 1.25-1.5
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Short 32-40mm
• Weight (g): 76 g

ISO Diameter: 438 , 451/ 20 x 1-1/8", 20 x 1-1/8"

• ISO Width (mm): 28 mm , 29 mm , 30 mm , 31 mm , 32 mm , 33 mm , 34 mm
• Labeled Size: 20 x 1-1/8 - 1-3/8
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Short 32-40mm
• Weight (g): 98 g

ISO Diameter: 406/20"

• ISO Diameter: 406 / 20" BMX
• ISO Width (mm): 44 mm , 45 mm , 46 mm , 47 mm , 48 mm , 49 mm , 50 mm , 51 mm , 52 mm , 53 mm , 54 mm
• Labeled Size: 20 x 1.75-2.125
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Short 32-40mm
• Weight (g): 132 g

ISO Diameter:559/26"

• ISO Diameter: 559 / 26" mtn
• ISO Width (mm): 60 mm , 61 mm , 62 mm , 63 mm , 64 mm , 65 mm , 66 mm , 67 mm , 68 mm , 69 mm
• Labeled Size: 26 x 2.4-2.75
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Short 32-40mm
• Weight (g): 283 g

ISO Diameter:559/26"

• ISO Diameter: 559 / 26" mtn
• ISO Width (mm): 48 mm , 49 mm , 50 mm , 51 mm , 52 mm , 53 mm , 54 mm
• Labeled Size: 26 x 1.9-2.125
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Med 41-55mm
• Weight (g): 171 g

ISO Diameter: 571/650c

• ISO Diameter: 571 / 650c
• ISO Width (mm): 18 mm , 19 mm , 20 mm , 21 mm , 22 mm , 23 mm
• Labeled Size: 650c x 18-23
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Med 41-55mm
• Weight (g): 89 g

ISO Diameter: 622/700c

• ISO Diameter: 622 / road / 29" , 630 / 27"
• ISO Width (mm): 18 mm , 19 mm , 20 mm , 21 mm , 22 mm , 23 mm
• Labeled Size: 700 x 18-23
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Short 32-40mm
• Weight (g): 100 g

• ISO Diameter: 622 / road / 29"
• ISO Width (mm): 18 mm , 19 mm , 20 mm , 21 mm , 22 mm , 23 mm
• Labeled Size: 700 x 18-23
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Med 41-55mm
• Weight (g): 101 g

• ISO Diameter: 622 / road / 29"
• ISO Width (mm): 18 mm , 19 mm , 20 mm , 21 mm , 22 mm , 23 mm
• Labeled Size: 700 x 18-23
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Long 56-74mm
• Weight (g): 101 g

• ISO Diameter: 622 / road / 29"
• ISO Width (mm): 28 mm , 29 mm , 30 mm , 31 mm , 32 mm
• Labeled Size: 700 x 28-32
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Med 41-55mm
• Weight (g): 129 g

• ISO Diameter: 622 / road / 29"
• ISO Width (mm): 35 mm , 36 mm , 37 mm , 38 mm , 39 mm , 40 mm , 41 mm , 42 mm , 43 mm
• Labeled Size: 700 x 35-43
• Presta Shaft Type: Threaded
• Tube Compound: Butyl
• Valve: Presta
• Valve Core: Removable
• Valve Length: Short 32-40mm
• Weight (g): 140 g

Replacement mesh seat pad adds new cush to your Volae or Vision mesh seat. Fits both Original Volae Mesh Fabric seat (pre-2012 Volae and Vision), and the Comfort Volae Mesh Fabric seats.

Product Notes:

• Pad Dimensions:  16" wide x 10.75" nose to back x 2" thick
• Color of pad may be white, yellow or green.

The Standard idler has a bearing and retaining ring. Two of these are used in the front and two are used in the rear. Terratrike idler wheels are now made of delrin which is much more durable then the old urethane idlers. The standard is smooth and toothless.

• Fits all trikes except the Edge and Path
• Smooth
• 2 1/8" diameter
• 50mm O.D., 8mm I.D. on bearing, 15mm width

A smooth, fast rolling tire designed for speed on the road or bike path. Deep water grooves/siping help channel water in wet conitions. Great for recumbents, trekking, comfort and mountain bicycles. K-Shield technology. Blackwall.

Click on the Specifications tab above for tire pressure, weight and other details.

Recommended Tubes for 16x1.5 (305mm):
Standard Presta

Specifications:

• ISO 305/40
• Bead Type Steel
• Weight 326 grams
• Max PSI 100

Recommended Tubes for 20x1.5 (406mm)
Schwalbe Presta
Standard Presta
Schwalbe Schrader
Standard Schrader

Specifications:

• 100 psi max.
• 432 grams
• ISO 406/40

Recommended Tubes for 26x1.5 (559):
Schwalbe Presta
Standard Presta
Schwalbe Schrader
Standard Schrader

Specifications:

• 100 psi max.
• 574 grams
• ISO 559/40

This cushy add-on for all Gekko models provides lots of extra comfort (living up to its name - Cloud Nine!). And adds a slightly higher seating position on your rides. It is easy to mount, uses breathable fabric, and does not interfere with the integrated seat pouch or flag holder. Retrofittable.

FSA Gossamer takeoff triple crankset with 74/130mm bolt circle diameter and 165mm crank arms. FSA Mega Exo external bottom bracket included. Chainrings not included.

Faster, more accurate shifting at a more affordable price point. Employs PC-991 inner and outer plate designs paired with nickel-plated outer and gray inner plates. Truvatic chainrings enhance shifting performance, as on all PowerChain II™ chains.

Chains include Power Links for tool-free installation and removal, but require chain tools for proper length adjustment.

14' for recumbent applications. This chain was cut in one piece from a bulk roll.

TECHNOLOGY HIGHLIGHT(S) PowerLink™, PowerChain II™
CLOSING LINK PowerLink™
OUTER PLATE Nickel Plate
INNER PLATE Grey
PIN TREATMENT Chrome hardened
RIVET TYPE Step
RECOMMENDED GROUP X.9/X.7/SX 5È

The Greenspeed Scorcher 120 was developed to be lighter and faster than previous versions of the Scorcher, and is used on the Greenspeed Aero.

Recommended Tubes for 16x1.5 (349mm):
Schwalbe Presta
Schwalbe Schrader

Recommended Tubes for 20x1.5 (406mm):

Schwalbe Presta
Schwalbe Schrader

Rear Shock Replacement Springs for your HP Velotechnik. Fits the DNM-DV22 shock.  Click here to view the shock.

Specifications

• 83 mm long
• 450 lbs/in fits rider and load weight range of up to 176 lbs
• 550 lbs/in fits rider and load weight range of 176 to 220 lbs
• 650 lbs/in fits rider and load weight range of 220 to 308 lbs

These lightweight, cold forged Kalloy stems are available in a variety of sizes from 80mm to 140mm to fine tune the cockpit fit of your Volae. Attach to 1 1/8” outside diameter steering mast and have a 1” handlebar clamp. Color: Black.

The ErgoLuxe seat cover is the most comfortable trike seat on the market and the most comfortable you will ever sit on. Beautifully designed to provide the ultimate level of comfort and back support. Breathable fabrics maximise airflow, and ergonomic extra cushioning in the base and sides further enhance comfort. The tension in the back can be easily adjusted to suit the rider. Integral Sidepod mounts eliminate the need for over the seat Sidepod straps. A handy top weather-sealed pocket for small items such as keys and phones. Reflective side detailing keeps you safe at night.

Seat cover only. Shown in the photo with frame for illustration purposes. Fits Sprint X Tour and all older Sprint seat frames. Can be purchased as a seat frame and cover pack also.

Fits over a seat frame that is 15" wide, approximately 23" tall (due to the curve to the base) and approximately 10.5" deep on the base (due to the curve up to the back).

Replacement seat cover for the EZ series of Sun Recumbents. Also works on RANS standard seats and Easy Racer seats.

Replacement seat skewer for attaching the lower seat bracket to the seat slider on a Volae bike. This skewer is 95mm long with 25mm of thread. The skewer does not include the specialty nut. The Lower Seat Skewer Attachment Plate must be purchased separately. This skewer will also fit some Vision applications. See Product Notes for fit application. Skewer measurements are listed as being longer than the previous Vision measurements, because we are measuring the entire length of the skewer rod.

Product Notes:

• 95mm: Fits the Volae lower seat attachment assembly and captain seats on all Vision tandems.

TerraTrike's 10t Deluxe Idler is designed for quiet operation and uniform wear (original polyurethane version could flat-spot). Long-wearing black delrin material with pre-installed sealed bearing. The Deluxe Idler Wheel features a toothed cog and open holes to allow for a lighter product that is quieter and longer lasting.

• Fits all Terra Trikes except the Edge and Path
• 10 teeth
• 2 1/8" diameter
• 8mm I.D. on bearing

OpenGlide technology for smooth shifting. Semi spidered design for light weight. CroMoly steel cogs. Three largest cogs are attached to an aluminum spider.

Cogs: 11, 13, 15, 17, 19, 22, 25, 28, 32, 36
Chain: SRAM and Shimano 10spd

Replacement crankarms for Schlumpf bottom brackets. Upgrade your stock 170mm crankarms to shorter a shorter version. Pair, silver.