Clearance Accessories

This ingenious kickstand mounting bracket allows a Greenfield Traditional Kickstand to be installed at the rear dropout. Works with all Volae, RANS Stratus, Stratus LE, and Vision 20/26 models.

Includes hardware and instructions.

• Not recommended for tandems.
• Click for Installation Instructions.
• Kickstands are not designed to hold the weight of the rider. Do not sit on the bike when the kickstand is in the down position, it could cause the kickstand to fail.
• See the Kickstand Fit List in our Help Guides section for more fit information.

These mounting brackets allow you to mount reflectors, taillights and other accessories in different positions on your recumbent (chain stay, seat stay, seat frame, derailleur mast, etc.).  The larger sizes work great for mounting cadence sensors on front derailleur masts for Garmins and computers.

Product Notes:

• Some shimming may be required depending on the application.
• X-Small: Fits 12.7mm or 1/2 inch diameter tubes.
• Small: Fits 15.8mm or 2/3 inch diameter tubes.
• Medium: Fits 19mm or 3/4 inch diameter tubes.
• Large: Fits 25.4mm to 26.8mm or 1 to 1 1/16 inch diameter tubes.
• X-Large: Fits 28.6 to 31.8mm or 1 1/8 to 1 1/4 inch diameter tubes.

Replacement foam roll for Volae Headrests. 5.5" long by 4.25" diameter.

The Zefal Spin mirror works great on the ICE VTX or Sprint X series in conjunction with the ICE mirror mount if you want a more compact mirror.

Helps to be seen by reflecting light from vehicles.

Helps to be seen by reflecting light from vehicles.

The Medium Seat Pack mixes a low-profile, aesthetically pleasing shape with ample storage room (9x5x16cm) for your small riding essentials. It attaches to the saddle easily via hook-and-loop straps, and it features a roll-up closure to keep its contents safe. You'll also find a reflective patch at the rear that increases your visibility to motorists in low-light conditions.

Product Notes:

• Secure attachment to the saddle with easily adjustable hook-and-loop strap.
• Roll-up closure for ultimate flexibility of what you can carry and super water-resistance.
• Reflective patch on back that also allows for a Stix light to be clipped on securely with the fabric clip.
• Dimensions (cm): 9 x 5 x 16

The Large Seat Pack mixes a low-profile, aesthetically pleasing shape with ample storage room (10x6.5x18cm) for your larger riding essentials. It attaches to the saddle easily via hook-and-loop straps, and it features a roll-up closure to keep its contents safe. You'll also find a reflective patch at the rear that increases your visibility to motorists in low-light conditions.

Product Notes:

• Secure attachment to the saddle with easily adjustable hook-and-loop and silicone straps to go around the seatpost.
• Roll-up closure for ultimate flexibility of what you can carry and excellent water-resistance.
• Expansion zippers for when you need to fit in more than you ever imagined.
• Reflective patch on back that also allows for a Stix light to be clipped on securely with the fabric clip.
• Dimensions (cm): 10 x 6.5 x 18

No Q Tower is complete without custom fitted Q Clips. Sleek stainless steel minimizes interference with your door seal, while the custom fit and accompanying base pad connect securely to your vehicle.

What Q Clip you get is based upon your vehicle. Please contact us for fit information for your vehicle, or check out Yakima's fit guide.

Choose from the available options.

Demo unit with surface scratches.  Structural integrity not affected.  Includes hardware (not pictured).

Want to go faster, further and with less effort? Stay warm and dry in cold weather? A recumbent bike or trike gives you a serious aerodynamic advantage, but you can get even more benefit by using a well designed front fairing. The Streamer front fairing from HP Velotechnik will fit almost any recumbent and many tricycles. It is guaranteed to improve your riding comfort and efficiency, protects you from the elements and helps you slip through the air with minimum effort. And it looks great!

Constructed from strong, see-through plastic with unique lightweight aluminum mounting hardware, it gets its strength from good design and the use of high-tech materials. It is easy to fit and removable in seconds for transportation or storage. A single quick release lever releases the windshield and supporting stays, leaving two discreet brackets mounted on the frame. The windshield can then be rolled up for traveling. The Streamer is a highly efficient teardrop shape that offers a minimal frontal area and directs air gently around your body without blasting it into your face. The greatest benefits are felt at higher speeds, so that the faster you go, the more benefit you get, but even at a cruising speed of 15 km/h (10 mph) there is a noticeable decrease in wind drag. The effect of headwinds is greatly reduced and side winds are felt as almost beneficial. The aerodynamic advantage of the fairing depends on the position of fairing, rider an bike as well as on clothing. Carry out a testride before purchase on your bike to find out your specific benefit. Due to its open shape, riding with the Streamer is extremely silent, avoiding any ‘rolling thunder’.

The Streamer fairing makes you stand out from the crowd and makes you become more visible at night. Included with the Streamer, you’ll receive a mount to hang your front light so that it shines from underneath the fairing, alternatively, we offer a Streamer version with a hole for your front light. The windshield gets most of its strength from its shape but complete rigidity is ensured by a pair of channel section aluminium spars which are located on widthways by strips of velcro. This mounting system means there is no drilling needed in the fairing, eliminating a potential breaking point. It also makes the fairing easy to break down for transportation. Because of the rigidity of this system, the plastic screen can be made verry thin but does not vibrate, rattle or transmit any road noise. In normal use the windshield is almost indestructible, it will withstand severe knocks and even modest dropping without breaking. Abrasion can lead to scratching of the surface but this in no way affects its functionality as the rider is always looking over the top edge. The windscreen comes standard with edging tape all the way round. The fairing is mounted onto the frame by two fully adjustable struts, the front one mounts under any bottom bracket or sealed bottom brackets tube, and is held by a quick release lever. Our new quickmount strut can be assembled in minutes without opening the bottom bracket bearing. Please note that for a good view over the fairing your crank axle should not be higher than 18 cm (7″) above your seat base. The rear strut is a telescopic pressure fit and mounts onto the main boom of the bike by means of a rubber coated jubilee clip. Because of the positioning of the mounting brackets they are able to take large front or side loads without moving, making a structure that is extremely rigid.

Product Notes:

• Weight windscreen ………….. 1450 g
• Standard mount ………………… 985 g
• Length ………………………….. 1000 mm
• Width ……………………………… 550 mm
• Material ……………………… clear PETG
• Does not work with Pinion or Steps booms.

Cinch strap holds the headrest foam onto the hardware of a Volae headrest.

The Mardy Cargo Pannier is Po Campo's highest capacity waterproof bike bag yet, packed full of features for living your life by bike. It attaches/detaches to your bike in seconds with super-strong Fidlock® magnetic buckles, then converts to a tote/shoulder bag off the bike. Featuring a separate shoe compartment, water bottle pockets, integrated raincover, LED zipper pull, and made from bluesign® recycled polyester fabric.

Easy on, easy off - helping to make your life more mobile

Slide the Fidlock® magnet buckles side-to-side to release, then wrap attachment the attachment straps over your rear rack and the magnets which happily click back together. Pull the bottom attachment ring down to clip to the bottom of your rack for a stabilizing third connection point. Easy peasy!

Separate shoe compartment!

The Mardy Cargo Pannier is loaded with many spectacular features. But one that we really think makes this bag stand apart is the extra shoe compartment. No longer does your laptop and personal items have to share space with your stinky shoes. Separate those things. Your after work clothes will thank you.

All in the details

Po Campo designed this bag to meet your needs and surpass your expectations. Just check out these tech specs:

Attachment style: Fidlock® magnetic buckles and pull-down anchor hook

Capacity: 25 lbs

Critical dimensions: Distance between top of rack and wheel axle should be at least 10”

Fits devices: Padded sleeve holds 13” laptops. Most 15” laptops can fit in main compartment.

Nighttime visibility: Reflective stripes on straps and sides with area for clip-on bike light.

Pockets: 9 total. Four exterior pockets: one easy access waterproof pocket and two water bottle pockets. Five interior pockets, including organization pockets, a zippered pocket, and a padded pocket for laptops.

Size: W 14” x H 17.5” x D 6.5”

Strap details: Adjusts to 52”

maxVolume: 25.1L / 1532 cubic inches

Water resistance: Built-in downpour proof raincover and coated fabrics

Weight: 2.9 lb