Flags & Safety

Plastic flag holder fits Catrike recumbent trikes and holds the flag securely in place while you ride. Allows easy mounting of a standard safety flag (not included). Works great on bikes with rack mounts on frame. Includes stainless mounting bolt. The inner diameter of the Catrike flag mount is 6mm and it works with 6mm flag pole shafts. Also, works on a Volae and may work on other brands of trikes, too.

Ride with safety and style! These bike flags come complete with a three-piece shock corded fiberglass pole. The shock corded feature makes for easy assembly and keeps the pole together on bumpy roads. Axle mount is not included.
The three-piece shock corded 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads.
Flags are constructed of durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

Ride with safety, ride with style! Our bike flags come complete with a three-piece shock corded 6mm fiberglass pole.
The three-piece 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads.
Flags are constructed with durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

Flag Size: 35 in. long, 10.25 in. wide
Style: Flag
Pole: 6mm banner style pole included (72 in. long when assembled, 25.5 in. when broken down)
Fabric: SunTex with Reflecto Blast
Designer: David Ti

Additional flag mount to allow an alternative flag position from the built in seat top holes. Especially useful on the Sprint to give a more vertical and more visible flag position. Clamps to any 1" (25.4mm) diameter horizontal tube.  Has a 6mm inner diameter for the flag pole shaft.

Super visible, super stylin' and super fun! These flags are superbly designed for both high performance and high style. The rakish aero shape is tuned for visibility, low drag, and just the right amount of attention getting back-and-forth waving. Highly visible under multiple lighting conditions and backgrounds, yet very stylish and something you can be proud to ride with. So pick your style, pick your colors and ride with pride!

Poles are black fiberglass for strength and to blend in with your other black accessories. Poles are a combined 72 inches (1.8m)long and separate in the middle for transport. Special silicone rubber grip keeps tubes from separating until you tell them to. 

Dimensions:

• Pole: 72 inches x 6 mm, constructed of two 36" sections
• Flag: 30" long x 5.5" wide

The three-piece shock corded 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads.

Flags are constructed with durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

The three-piece shock corded 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads.

Flags are constructed with durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

Flag Size: 51 in. long, 11 in. wide

Style: Flag

Pole: 6mm banner style pole included (72 in. long when assembled, 25.5 in. when broken down)

Fabric: SunTex

Designer: David Ti

High visibility flag with three-piece pole for convenient storage. With ICE logo, a reflective strip, and an eyelet for attaching streamers. 

Increase your visibilty on any bike or trike with this two piece take-apart reflective safety flag. Includes an axle mount installation bracket for those with bolt-on rear axles.

Replacement Southwinds flag pole clips. Sold as individual.

Ride with safety, ride with style! Our bike spinners come complete with a three-piece shock corded 6mm fiberglass pole. The shock corded feature makes for easy assembly and keeps the pole together on bumpy roads.

Spinners are constructed with durable UV resistant SunTex fabric and feature a heavy duty ball bearing swivel to attach the spinner to the pole.

Flag Size: 35 in. long, 7.5 in. wide
Style: Spinning Windsock
Pole: 6mm spinner style pole included (72 in. long when assembled, 25.5 in. when broken down)
Fabric: SunTex
Designer: David Ti

Simple yet effective, this rubber clip snaps around your flag pole and allows you to attach nearly any bicycle rear light. A super simple way to increase your night (or daytime) visibility even more. Works with any rear light designed to attach to a vertical tube.

1 inch (25.4mm) outer diameter compatible with almost any bicycle rear light designed to attach to a seatpost or other vertical tube. 1 inch tall with a 1/4 inch (6.3mm) ID. Light sold separately.

The three-piece shock corded 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads.

Flags are constructed with durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

The three-piece shock corded 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads.

Flags are constructed with durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

SoundWinds Bike Flag

Flag Size: 51 in. long, 12 in. wide

Style: Flag

Pole: 6mm banner style pole included (72 in. long when assembled, 25.5 in. when broken down)

Fabric: SunTex

Designer: David Ti

Ride with safety, ride with style! Our bike flags come complete with a three-piece shock corded 6mm fiberglass pole. The shock corded feature makes for easy assembly and keeps the pole together on bumpy roads.

Flags are constructed with durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

The three-piece shock corded 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads.

Ride with safety, ride with style! Our bike flags come complete with a three-piece shock corded 6mm fiberglass pole. The shock corded feature makes for easy assembly and keeps the pole together on bumpy roads.

Flags are constructed with durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

Size: 25 in. x 52 in. (w x h)
Style: Flag
Pole: 6mm banner style pole included (72 in. long when assembled, 25.5 in. when broken down)
Fabric: SunTex
Designer: David Ti 

This three-piece shock corded 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads. The pole is 72 in. long when assembled and 25.5 in. when broken down.

For use with SoundWinds Falcoln, Fan, Fanion, Garden Sail, Lark, Pennant, Phoebus, Pop, Sail and Spiral Recumbent Bike Flags.

Size: 6mm (72 in. long when assembled, 25.5 in. when broken down)

This is not your average safety flag - it's much cooler than the standard - issue orange triangle! It comes with streamers which attach by velcro and are great for rear visibility. Attach one or two to your TerraTrike by sliding it into the seat tube - simply punch a hole in the seat tube cap. The TerraTrike seat bag won't interfere.

Or, you can remove the fingers and attach an Extension Flag or add a Flag Sleeve to add even more Extension Flags.

The three-piece shock corded 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads.
Flags are constructed with durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

SoundWinds Bike Flag

Flag Size: 31 in. long, 15.5 in. wide

Style: Flag

Pole Banner: 6mm banner style pole included (72 in. long when assembled, 25.5 in. when broken down)

Fabric: SunTex

Designer: David Ti

TerraTrike extension flags are a great way to personalize your trike! These 8.5 x 13 inch flags are made of a lightweight nylon that won’t hinder your speed from adding excess drag, and have a velcro strip that allows it to be quickly attached to the TerraTrike Flag Sleeve, which slides onto the TerraTrike Fingers Safety Flag. TerraTrike Flag Sleeve and Flag sold separately.

Flag Designs: Don't Tread on Me, Flame Job, Tie Dyed, USA.

Ride with safety, ride with style! Our bike spinners come complete with a three-piece shock corded 6mm fiberglass pole. The shock corded feature makes for easy assembly and keeps the pole together on bumpy roads.

Spinners are constructed with durable UV resistant SunTex fabric and feature a heavy duty ball bearing swivel to attach the spinner to the pole.

Flag Size: 26 in. long, 6 in. wide
Style: Spinning Windsock
Pole: 6mm spinner style pole included (72 in. long when assembled, 25.5 in. when broken down)
Fabric: SunTex
Designer: David Ti

Flag mount designed for ICE hard shell seats.  Can also be mounted to other hardshell seats.

Has a 6mm inner diameter for the flag pole shaft.

Herrmans 12" (30 cm) Safety Wing. Swing the flag out from your seat stay or rear rack. You will be amazed at how much extra room the driver gives you. The safety wing has built in reflectors for extra visibilty at night.

Halt immediately and effectively destroys an animal's initiative to be aggressive. The dog will quickly withdraw without any outcry and in most cases will refrain from a future attack against the person who has applied the repellent. The active ingredient in Halt creates a sensation of heat that will last for several minutes, after which the animal returns to normal. Produces a liquid stream up to 10 feet - used by the US Postal Service since 1966. Not for use on humans!

Aardvark Leg Bands feature reflective 3M scotchlite material and saves pants from hungry chainrings.

• 1" Wide
• Velcro closure

This ultra-light safety enhancer us made of fluorescent mesh, 3M Scotchlite™ reflective material, and durable nylon. Velcro mounting loop allows attachment to any tube up to 1.5" in diameter, or just safety-pin it to your bag, seat mesh or pannier. Provides reflection from auto headlights that is more visible then most tail lights! 7" x 7"

Be seen with this highly visible teardrop style flag. Made from an indestructible nylon fabric with reflective edging and feature bold graphics and colors. Each flag measures 36" x 9" and comes with a 48" flag pole with flag clip.

These are a great way to stylize your trike (or bike) and make yourself visible to others.
 

The TerraTrike Universal Flag does not have the TerraTrike logo on it, so you can use it on any brand of trike and persoanlize it with their cool assortment of extension flags.  This is not your average safety flag - it's much cooler than the standard issue orange triangle! It comes with streamers which attach by velcro and are great for rear visibility. Attach one or two to your trike by sliding it into the seat tube - simply punch a hole in the seat tube cap.  

Or, you can remove the fingers and attach an Extension Flag or add a Flag Sleeve to add even more Extension Flags.

Ride with safety, ride with style! Our bike flags come complete with a three-piece shock corded 6mm fiberglass pole. The shock corded feature makes for easy assembly and keeps the pole together on bumpy roads.
The three-piece shock corded 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads.
Flags are constructed with durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

Flag Size: 34 in. long, 9 in. wide
Style: Flag
Pole: 6mm banner style pole included (72 in. long when assembled, 25.5 in. when broken down)
Fabric: SunTex
Designer: David Ti

Ride with safety, ride with style! Our bike spinners come complete with a three-piece shock corded 6mm fiberglass pole. The shock corded feature makes for easy assembly and keeps the pole together on bumpy roads.

Spinners are constructed with durable UV resistant SunTex fabric and feature a heavy duty ball bearing swivel to attach the spinner to the pole.

Flag Size: 24 in.
Style: Spinning Windsock
Pole: 6mm spinner style pole included (72 in. long when assembled, 25.5 in. when broken down)
Fabric: SunTex with Reflecto Blast
Designer: David Ti

This is a 21" Velcro sleeve designed to slide over your Terratrike Universal Flag pole and allows you to add extra Extension Flags quickly and easily.

Ride with safety, ride with style! Our bike flags come complete with a three-piece shock corded 6mm fiberglass pole. The shock corded feature makes for easy assembly and keeps the pole together on bumpy roads.

Flags are constructed with durable UV resistant SunTex fabric and feature a bottom cord lock to securely attach the flag to the pole.

• Flag Size: 37.5 in long, 21 in. wide
• Style: Flag
• Pole: 6mm banner style pole included (72 in. long when assembled, 25.5 in. when broken down)
• Fabric: SunTex
• Designer: David Ti

This three-piece shock corded 6mm fiberglass pole has a shock corded feature that makes for easy assembly and keeps the pole together on bumpy roads.

For use with SoundWinds Turi and Fusilli Recumbent Bike Windsocks.  Loop on the end for attaching spinner style flags.

Size: 6mm diameter.  72 in. long when assembled and 25.5 in. when broken down.