Skip to product information
1 of 6

SportCrafters Double OverDrive 2 Trike Trainer

SportCrafters Double OverDrive 2 Trike Trainer

SKU:210000021155

Regular price $399.00 USD
Regular price $399.00 USD Sale price $399.00 USD
Sale Sold out
Shipping calculated at checkout.

SportCrafters trike trainers are the only trainers in the world specifically designed for recumbent trikes. Easy to use, light-weight and portable, these trike trike trainers to not require any assembly or maintenance. The Double OverDrive 2 Trike Trainer features two innovative progressive resistance roller drums instead of one, for riders who want strong interval workouts. It uses the same proven rollers and resistance as the original Double OverDrive, with a new frame built around them.

The Double OverDrive 2 is SportCrafters hardest-working trike trainer. Resistance rises on its own as you pedal faster, and at high speed it pushes back harder than the road does. To make it harder or easier, change gears. For an easy recovery ride, turn the trainer around and it gives low to moderate resistance. At higher speeds, the Double OverDrive 2 Trike Trainer will ramp up to the highest resistance you can get to achieve a GREAT workout! 

It fits tadpole trikes and delta trikes with one-wheel drive and rear wheels from 16 inches to 700c tires. On a one-wheel-drive delta trike, put a Saris Indoor Bike Trainer Climbing Riser Block under the rear wheel that isn't driven and one under the front wheel. 

Because the trainer doesn't clamp your trike in place, you may feel a slight rocking forward and back as you pedal. How much depends on how firmly your front brakes hold and how stiff your trike frame is. You can use that gentle motion to help smooth out your pedal stroke. The Double OverDrive 2 is a good fit for riders who want to stay fit indoors. Use it in cold weather or super hot weather when conditions outside are less than ideal.

8 in stock

Have a question about this product?

View full details

IMPORTANT NOTES:

  1. In order to determine whether or not your delta trike is a 1-wheel or a 2-wheel drive, just pick up one of the rear wheels and rotate it backwards (leaving the other two wheels on the ground), then pick up the other rear wheel and rotate it backwards. If it is a 2-wheel drive trike, the crankset will rotate backwards with either wheel rotating backwards. If this is the case, then order the SportCrafters Two Wheel Drive Trike Trainer Set. We recommend using a Saris Indoor Bike Trainer Climbing Riser Block under the front wheel to level the trike.
  2. If it is a 1-wheel drive delta trike, then only the drive wheel will rotate the crankset backward, and the other wheel will not move the crankset at all. If this is the case, then you only need one Double OverDrive 2 Trike Trainer. For use with 1-wheel drive delta trikes without a differential, use one Saris Indoor Bike Trainer Climbing Riser Block under the non-drive rear wheel and one block under the front wheel.
  3. For use with Tadpole Trikes (2 wheels in front), use two Saris Indoor Bike Trainer Climbing Riser Blocks under the front wheels.
  4. To keep your floors clean and prevent slippage, place the SportsCrafters Trike Training Mat under your trike.
  5. At this time it is not recommended that these trainers be used with cycles outfitted with Enviolo hubs. The consistent load and cadence offered by Enviolo hubs does not allow an increased load provided by a variable-resistance trainer such as the SportCrafters. Therefore not enough resistance may be provided. The manufacturer is currently working with Enviolo to find a solution.
  6. Hostel Shoppe recommends using a trainer-specific tire or a tire with a smooth tread for best performance with trainer rollers. A street tire with more tread or knobby tires will wear prematurely and not perform well on the rollers, plus it will create more noise.  Call us at 715-341-2453 if you have questions on what tire might be best for your trike. Make sure your tires are properly inflated before using on your trainer, too.
  • Change the resistance level simply by changing your trike's gears
  • Powered by patented ARC Technology, the Double OverDrive 2 Trike Trainer delivers higher than real-road resistance
  • Lightweight, compact and easy to transport and store
  • Accommodates a wide range of wheel sizes and requires no clamping on the rear skewer
  • Identified by one red cap, one black cap on each of the drums.
  • Aluminum drums:  3.25" (82.5mm) diameter, 1/8" (3mm) wall thickness
  • End caps:  Molded polycarbonate
  • Drums are lathed on the axle for precision runout and balance
  • All drums are dynamically spin balanced, and will not distort in heat or sunlight
  • Bearings are greased and sealed, and do not require maintenance
  • Steel framework is zinc-plated and powder coated for ultimate durability
  • Fits tadpole trikes and delta trikes that drive one rear wheel (no differential).
  • Fits rear wheels from 16 inches to 700c.
  • Best on trikes with plenty of gears.

In the box:

  • One Double OverDrive 2 Trike Trainer
  • Rubber Feet

The SportCrafters Double OverDrive 2 Trike Trainer has a lifetime warranty which covers manufacturer's defects. It does not cover damage from abuse or misuse.

View the SportCrafters Double OverDrive 2 Trike Trainer manual in PDF format.