SportCrafters trike trainers are the only trainers in the world specifically designed for recumbent trikes. Easy to use, light-weight and portable, these trike trike trainers to not require any assembly or maintenance. The OverDrive 2 Trike Trainer features one innovative progressive resistance roller drum, which gives you a power profile and speed that comes as close as possible to reproducing real-road conditions. It also has a sturdier frame than the original version.
Powered by ARC Technology, the OverDrive 2 automatically adjusts resistance as the rider changes speed – no manual adjustment necessary (red end of the trainer is pointed to the rear for a higher resistance range). At higher speeds, the OverDrive 2 Trike Trainer will ramp up the resistance to realistically mimic road riding conditions. This trainer is perfect for the active trike rider who wants to maintain fitness while riding indoors. It is also perfect for families with varying skill levels. Just turn the trainer around (so that the red end points forward for a lower resistance range) and it automatically functions like a magnetic trainer with low to moderate resistance.
Resistance rises on its own as you pedal faster, so riding feels close to the road. To make it harder or easier, change gears. If your trike has only 3 or 8 speeds, you may not reach the top of its resistance range. If you want a gentler ride, turn the trainer around and it gives low to moderate resistance.
It fits tadpole trikes and delta trikes with one-wheel drive and rear wheels from 16 inches to 700c tires. On a one-wheel-drive delta trike, put a Saris Indoor Bike Trainer Climbing Riser Block under the rear wheel that isn't driven and one under the front wheel.
Because the trainer doesn't clamp your trike in place, you may feel a slight rocking forward and back as you pedal. How much depends on how firmly your front brakes hold and how stiff your trike frame is. You can use that gentle motion to help smooth out your pedal stroke. The OverDrive 2 is a good fit for riders who want to stay fit indoors. Use it in cold weather or super hot weather when conditions outside are less than ideal.
In order to determine whether or not your delta trike is a 1-wheel or a 2-wheel drive, just pick up one of the rear wheels and rotate it backwards(leaving the other two wheels on the ground), then pick up the other rear wheel and rotate it backwards. If it is a 2-wheel drive trike, the crankset will rotate backwards with either wheel rotating backwards. If this is the case, then order the SportCrafters Two Wheel Drive Trike Trainer Set. We recommend using a Saris Indoor Bike Trainer Climbing Riser Block under the front wheel to level the trike.
If it is a 1-wheel drive delta trike, then only the drive wheel will rotate the crankset backward, and the other wheel will not move the crankset at all. If this is the case, then you only need one OverDrive 2 Trike Trainer. For use with 1-wheel drive delta trikes without a differential, use one Saris Indoor Bike Trainer Climbing Riser Block under the non-drive rear wheel and one block under the front wheel.
At this time it is not recommended that these trainers be used with cycles outfitted with Enviolo hubs. The consistent load and cadence offered by Enviolo hubs does not allow an increased load provided by a variable-resistance trainer such as the SportCrafters. Therefore not enough resistance may be provided. The manufacturer is currently working with Enviolo to find a solution.
Hostel Shoppe recommends using a trainer-specific tire or a tire with a smooth tread for best performance with trainer rollers. A street tire with more tread or knobby tires will wear prematurely and not perform well on the rollers, plus it will create more noise. Call us at 715-341-2453 if you have questions on what tire might be best for your trike. Make sure your tires are properly inflated before using on your trainer, too.
Change the resistance level simply by changing your trike's gears
Powered by patented ARC Technology, the OverDrive Trike Trainer delivers real-road resistance
Lightweight, compact and easy to transport and store
Accommodates a wide range of wheel sizes and requires no clamping on the rear skewer
Drums are lathed on the axle for precision runout and balance
All drums are dynamically spin balanced, and will not distort in heat or sunlight
Bearings are greased and sealed, and do not require maintenance
Steel framework is zinc-plated and powder coated for ultimate durability
Fits tadpole trikes and delta trikes that drive one rear wheel (no differential).
Fits rear wheels from 16 inches to 700c.
In the box:
One OverDrive 2 Trike Trainer
Rubber Feet
The SportCrafters OverDrive 2 Trike Trainer has a lifetime warranty which covers manufacturer's defects. It does not cover damage from abuse or misuse.