GRIDE Solutions GXT Plus E-Trike Drive System for 26 inch Rear Wheels

The Gride Solutions Retrofit Push Throttle gives you instant power at your fingertips, which is perfect for quick starts, steep climbs, or when you simply want a smooth, effortless cruise.

Want to go further on your e-trike rides? Add a second battery to your GRIDE Solutions GXT Plus E-Assist System

The GRIDE Solutions GX Powercell 705 48V-4A Fast Charger can be purchased as a replacement charger or as a charger for a second GRIDE Solutions battery.

T-Cycle Battery Mounts are a strong, safe, and durable way to securely fasten your power source. Designed with the rider in mind, T-Cycle's mounts keep your battery low and centered to optimize the riding experience!

T-Cycle Battery Mounts are a strong, safe, and durable way to securely fasten your power source. Designed with the rider in mind, T-Cycle's mounts keep your battery low and centered to optimize the riding experience!

The Side Extender Block works with the TerraCycle Configurable Battery Mount to get the battery mount away from interfering with the drivetrain or frame parts on a trike. Especially useful in right side mounting applications where the trike folds.

T-Cycle Battery Mounts are a strong, safe, and durable way to securely fasten your power source. Designed with the rider in mind, T-Cycle's mounts keep your battery low and centered to optimize the riding experience!

This T-Cycle made Battery Mount for ICE Trikes comes with a shelf drilled to allow the mounting of many different batteries. Batteries are dense and difficult to carry. This mount lets you attach your EBO, Falco, Bafang, BionX, Neodrives or other battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached!  Down low is important for handling and stability—you don't want something as heavy as a battery on top of a rear rack. And out the way means you still get full use of your rear rack if you have one.  If you have been struggling with how to carry your battery, this elegant, simple solution is what you've been looking for!

Product Notes:

• The attachment mechanism and the mount itself are designed to carry batteries weighing up to 20 lbs (9kg).
• Works on ICE trikes with 20" or 26" rear wheels.
• All parts machined from 6061-T6 aluminum and black anodized. All fasteners are stainless steel.
• The primary attachment is to the fender strut tube. A pair of clamps attach another sideways tube. A mounting plate goes up from outside the chain up to the rear rack attachment point. A shelf attaches the the bottom of the mounting plate to hold the battery. The shelf is drilled and tapped to accept bottle boss batteries and the BionX downtube mounting rail, but other batteries can be easily mounted. The Ansmann battery system is designed to attach to a vertical plate, so it doesn't need the shelf at all. Batteries in nylon packs can be strapped to the shelf and to the vertical plate.
• T-Cycle also makes adapter plates for the BionX Type R (rear rack) and Falco batteries, since they have such different mountings.
• The battery Shelf is 6 x 3.25in (15.25 x 8.25cm) and has 15 M5x0.8 threaded holes for attaching batteries or battery adapter plates. 13 of the holes are in 2 rows with bottle boss spacing used by many batteries.
• Mounting hardware are provided for the rear rack attachment point for trikes with and without a rear rack.
• Both the vertical plate and the shelf are made from 1/4 inch (6.35mm) thick aluminum. This means it is both very sturdy and easily drilled to modify needed for your particular battery system.
• Compatible with all rigid framed ICE trikes from 2010 onwards. T-Cycle makes different kits for the ICE suspended trikes. Earlier rigid trikes may work, but haven't been tested. This mount is very specific to the ICE trikes, so it won't work with other brands. T-Cycle has a Universal Battery Mount that works on nearly all trikes, but doesn't work with the fold on an ICE trike like this ICE specific mount does.

This mount is ideal for riders looking to install electric assist on their ICE Trike with Rear Suspension that was manufactured after 6/2015.

Batteries are dense and difficult to carry. This mount lets you attach your Electric Bike Outfitters, Shimano, Neodrives, or other brand battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached! Mounting down low is important for handling and stability—you don't want something as heavy as a battery up high.  If you have been struggling with how to carry your battery, this elegant, simple solution is what you've been looking for!

This T-Cycle Battery Mount is made specifically for ICE Trikes with Rear Suspension that were manufactured post 6/2015.  For ICE Trikes with Rear Suspension that were manufactured prior to 7/2015, the T-Cycle Battery Mount For ICE Suspended Trikes Pre 7/2015 should be purchased instead.

This T-Cycle Battery Mount For ICE Suspended Trikes Post 6/2015 comes with a shelf that is pre-drilled to accommodate many different types of battery mounting plates/rails (not included).  The pre-drilled and tapped holes will fit Shimano, NeoDrive, BionX, and Ansmann battery plates/rails.  In some cases spacers or stand-offs may also be needed for a correct fit (not included).  If you will be using a Shimano STEPS battery, then purchase a T-Cycle Battery Mount STEPS Monorail (Rail Only) and a Shimano Steps E8016 Battery Controller w/o Key Cylinder Battery Cable 250mm.

Important Notes:

• This battery mount does not fit the ICE Full Fat models.  Instead, for the Full Fat, ICE recommends using the T-Cycle Configurable Battery Mount with 1.75" Clamp and mounting the battery to the main tube below the seat.
• Depending on the type of battery and mounting plate/rail you are using, you may also need to purchase a T-Cycle Battery Mount Adapter Shelf, which has a larger assortment of mounting holes.
• There is also an ICE Battery Suspension Pivot Mount for Trike Without Rack, which positions the battery in a nose-down orientation.  Fits post 6/2015 ICE Suspension Trikes only (without rack).
• If your post 6/2015 ICE Trike with Suspension has an ICE Suspension Rear Rack mounted on it, then order the ICE Battery Mount For Suspension Racks instead.

Fits both the Sprint and the Adventure models with suspension pre-July 2015. This T-Cycle made Battery Mount for Suspended ICE Trikes comes with a shelf drilled to allow the mounting of many different batteries. Batteries are dense and difficult to carry. This mount lets you attach your battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached! Down low is important for handling and stability—you don't want something as heavy as a battery on top of a rear rack. If you have been struggling with how to carry your battery, this elegant, simple solution is what you've been looking for! The T-Cycle battery mount attaches with a special mount through the suspension pivot, along with a stabilizing attachment up at the rack mount near the seatback adjustment. The suspension pivot is very strong, and is a great place to attach something heavy like a battery. Package includes spacers for the rack attachment point that work with or without a rear rack in place.

This T-Cycle Battery Mount is made specifically for ICE Trikes with Rear Suspension that were manufactured before 7/2015.  For ICE Trikes with Rear Suspension that were manufactured prior to 7/2015, the T-Cycle Battery Mount For ICE Suspended Trikes Post 6/2015 should be purchased instead.

Important Product Notes:

• For trikes manufactured AFTER 7/2015, you will need the T-Cycle Battery Mount For ICE Suspended Trikes Post 6/2015.
• This battery mount does not fit the ICE Full Fat models.  Instead, for the Full Fat, ICE recommends using the T-Cycle Configurable Battery Mount with 1.75" Clamp and mounting the battery to the main tube below the seat.
• Depending on the type of battery and mounting plate/rail you are using, you may also need to purchase a T-Cycle Battery Mount Adapter Shelf, which has a larger assortment of mounting holes.
• There is also an ICE Battery Suspension Pivot Mount for Trike Without Rack, which positions the battery in a nose-down orientation.  Fits post 6/2015 ICE Suspension Trikes only (without rack).
• If your post 6/2015 ICE Trike with Suspension has an ICE Suspension Rear Rack mounted on it, then order the ICE Battery Mount For Suspension Racks instead.